Description
This wire mesh machine is mainly used to produce the mesh for the exhaust pipes.
1. Braiding machine level: E2-E8;
2. Rotation speed: 45-85 rpm;
3. The machine adopts 220V three-phase AC power supply;
4. The machine adopts a three-stage frequency converter to control the weaving main shaft, take-up main shaft, and silk shaft untwisting respectively. The output frequency of the inverter is 50Hz, and the three-stage linkage ratio is set according to the wire diameter, tensile strength, and elongation during the weaving process.
5. Overall dimensions and net weight of the machine:
<1> Overall dimensions of the machine: 850mmX550mmX1500mm (length x width x height);
<2> Net weight of the machine: 110KG;
6. The coiling and drafting motor is controlled by the frequency converter from 0 to 75 rpm.
7. Machine output: 15m-40m/hour;
Technical Parameters
No. | Bellow OD | Mesh Width | Mesh ID | No of Needles |
1 | Φ44.6mm | 70mm | Φ44.6mm | 26 Needles |
2 | Φ58.6mm | 92mm | Φ58.6mm | 32 Needles |
3 | Φ63.7mm | 100mm | Φ63.7mm | 30 Needles |
4 | Φ66.8mm | 105mm | Φ66.8mm | 38 Needles |
5 | Φ73.2mm | 115mm | Φ73.2mm | 40 Needles |
6 | Φ79.6mm | 125mm | Φ79.6mm | 28 Needles |
7 | Φ86mm | 135mm | Φ86mm | 32 Needles |